Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
7. Remove the eight bolts from the valve body cover, then remove the cover.
8. Disconnect the electrical connectors from shift solenoid 1 (SS1), shift solenoid 2 (SS2), the pressure control solenoid (PCS) and the lockup
solenoid.
Notice: Discard the SS1 O-ring.
9. Remove the retaining bolt, clamp and SST.
Notice: Discard the SS2 O-ring.
10. Remove the retaining bolt and SS2.
11. Remove the valve body bolt located to the left of the PCS.
