Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Transmission Mount: Service and Repair
Transaxle Center Mount
Removal Procedure
1. Remove the center member from the vehicle.
2. Remove the transaxle center mount-to-center member bolts.
3. Remove the transaxle center mount.
Installation Procedure
1. Install the transaxle center mount.
2. Install the transaxle center mount-to-center member bolts.
-
Tighten the transaxle center bracket-to-transaxle bolts to 48 ft. lbs. (65 Nm).
3. Install the center member into the vehicle.
