Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Front Door Window Glass: Service and Repair
Removal Procedure
1. Remove the door seal trim.
2. Remove the B-pillar molding.
3. Remove the screws that secure the glass to the window regulator.
4. Remove the glass from the door.
Installation Procedure
1. Install the glass in the door and position the glass within the window regulator.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
2. Install the glass to the window regulator with the screws.
Tighten
Tighten the glass screws to 7 N.m (62 lb-in).
3. Install the B-pillar molding.
4. Install the door seal trim.
