Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Wiper Switch: Service and Repair
WIPER/CRUISE CONTROL SWITCH AND LEVER
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the upper and the lower steering column cover panel screws.
3. Remove the upper and the lower steering column cover panels.
4. Remove the wiper switch by pushing in on the tabs on the top and the bottom of the switch housing.
5. Disconnect the electrical connector from the wiper switch. Disconnect the cruise control connector, if equipped.
Installation Procedure
