Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Windshield Washer Hose: Service and Repair
Removal Procedure
1. Open the hood.
2. Disconnect the windshield washer hose from the washer nozzles on the hood.
3. Remove the front left wheel.
4. Remove the front wheel well splash shield.
5. Disconnect the washer hose from the washer reservoir.
6. Remove the washer hose.
Installation Procedure
1. Connect the washer hose to the washer pump.
2. Install the front wheel well splash shield.
3. Install the front left wheel.
4. Connect the windshield washer hose to the washer nozzles on the hood.
5. Close the hood.