Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Windshield Washer Pump: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the left front left wheel.
3. Remove the front wheel well splash shield.
4. Disconnect the electrical connector.
5. Disconnect the washer hose from the washer pump.
6. Remove the washer pump.
Installation Procedure
1. Install the washer pump.
2. Connect the washer hose to the washer pump.
3. Connect the electrical connector.
4. Install the front wheel well splash shield.
5. Install the left front wheel.
6. Connect the negative battery cable.
