Leganza SX L4-2.2L DOHC D-TEC MFI (1999)
Front Door Striker: Service and Repair
(Front Door Shown, Rear Door Similar)
Removal Procedure
1. Remove the screws and the door lock striker.
Installation Procedure
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
1. Install the screws and the door lock striker.
Tighten
Tighten the door lock striker screws to 20 Nm (15 lb.ft).
