Leganza SX L4-2.2L DOHC D-TEC MFI (1999)
12. Remove the front muffler heat shield nuts, and let the shield rest on the front muffler.
13. Pull out each parking brake cable (and rubber grommet) from its underbody access to the parking brake/gearshift console.
Installation Procedure
1. Route the parking brake cable to the protruding hole on the rear knuckle assembly.
2. Fasten the parking brake cable to the [ever at the rear of the disc brake backing plate.
3. Install the clip that secures the parking brake Gable to the protruding hole on the rear knuckle assembly.
4. Install the bolt securing the parking brake cable to a holding bracket, attached to the trailing link bracket on both the driver and passenger sides of
the vehicle.
Tighten
Tighten the parking brake cable bracket-to-trailing link bracket nuts to 90 Nm (66 ft. lbs.).
