Leganza SX L4-2.2L DOHC D-TEC MFI (1999)
Parking Brake Lever: Service and Repair
Parking Brake Lever
Removal Procedure
1. Release the parking brake.
2. Remove the parking brake/gearshift console hood.
3. If necessary, remove the screws and the washers securing the keyless entry receiver to the underbody bracket.
4. Measure the thread length from the end of the pull rod to the hex nut.
5. Loosen the parking brake adjustment nut from the eye bolt pull rod of the parking brake lever assembly.
6. Remove the parking brake cable ends from the equalizer.