Leganza SX L4-2.2L DOHC D-TEC MFI (1999)
Engine Mount: Service and Repair
Engine Mount - Forward
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Raise and suitably support the vehicle.
3. Remove the center member. Refer to Steering and Suspension.
4. Remove the bolts that secure the engine mount to the center member.
5. Remove the engine mount.
6. Remove the engine mount bracket-to-engine block nuts.
7. Remove the engine mount bracket-to-engine block bolts.
8. Remove the engine mount bracket.
INSTALLATION PROCEDURE
