Leganza SX L4-2.2L DOHC D-TEC MFI (1999)
11. Remove the crankshaft pulley bolts.
12. Remove the crankshaft pulley.
13. Remove the right engine mount bracket. Refer to Engine Mount; Service and Repair.
14. Remove the power steering hose clamp bolt, and position the hose clear of the repair area.
15. Remove the front timing belt cover bolts.
16. Remove the front timing belt cover.
17. Using the crankshaft gear bolt, rotate the crankshaft clockwise until the timing mark on the crankshaft gear is aligned with the notch at the bottom
of the rear timing belt cover.
Notice: The camshaft gears must align with the notch on the valve cover or damage to the engine could result.
