Leganza SX L4-2.2L DOHC D-TEC MFI (1999)
1. Insert the main catalytic converter bolts into the front muffler flange and install the rubber hangers that attach the connecting pipe to the vehicle.
2. Install the nuts to secure the front muffler pipe to the main catalytic converter.
Tighten
Tighten the front muffler pipe-to-main catalytic converter nuts to 30 Nm (22 ft. lbs.).
3. Install the post-converter heated oxygen sensor.
Tighten
Tighten the post-converter heated oxygen sensor to 41 Nm (30 ft. lbs.).
