daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

ABOUT US
Ignition Relay "1" <--> [Main Relay (Computer/Fuel System)] > < Fuel Cutoff Switch <--> [Inertia Fuel Shutoff Switch]|Description and Operation

Leganza SX L4-2.2L DOHC D-TEC MFI (1999)

Page 1
background image

Fuel Cutoff Switch: Service and Repair

FUEL CUTOFF SWITCH

Removal Procedure

1. Disconnect the negative battery cable.
2. Remove the passenger front rocker trim panel.
3. Remove the lower B-pillar trim panel.
4. Reposition the carpet.
5. Remove the fuel cutoff switch mounting bolts.
6. Disconnect the electrical connector at the fuel cutoff switch.

Installation Procedure

1. Connect the electrical connector at the fuel cutoff switch.
2. Install the fuel cutoff switch mounting bolts.

Tighten:  Tighten the fuel cutoff switch mounting bolts to 3 Nm (27 lb-in).

Important:  The fuel cutoff switch may have to be reset in order to start the vehicle.

3. Reposition the carpet.
4. Install the lower B-pillar trim panel.
5. Install the passenger front rocker trim panel.
6. Connect the negative battery cable.

Ignition Relay "1" <--> [Main Relay (Computer/Fuel System)] > < Fuel Cutoff Switch <--> [Inertia Fuel Shutoff Switch]|Description and Operation