Leganza SX L4-2.2L DOHC D-TEC MFI (1999)
Alarm Module: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the floor console.
3. Disconnect the module/receiver electrical connector.
4. Remove the module/receiver by sliding it toward the front of the vehicle until it disengages from its mounting bracket.
Installation Procedure
1. Install the module/receiver by sliding it onto its mounting bracket and pushing it toward the rear of the vehicle until it is secure.
2. Connect the module/receiver electrical connector.
3. Install the floor console.
4. Connect the negative battery cable.