Leganza SX L4-2.2L DOHC D-TEC MFI (1999)
Blower Motor Relay: Service and Repair
Blower Motor Relay
Removal Procedure
1. Disconnect the negative battery cable. The relay is located in front of the blower motor.
2. Slide the relay and the connector up and out of its retaining track.
3. Separate the relay from the connector.
Installation Procedure
1. Align the high-blower relay contacts with the high blower relay terminal slots.
2. Push the relay firmly into the base. The relay must be seated and flush with the edge of the base.
3. Connect the negative battery cable.
