Leganza SX L4-2.2L DOHC D-TEC MFI (1999)
Steering Gear: Service and Repair
Removal and Installation
RACK AND PINION ASSEMBLY
-
Tools Required
-
KM-507-B Ball Joint Remover
Removal Procedure
1. Disconnect the negative battery cable.
2. Raise and suitably support the vehicle.
3. Remove the wheels.
4. Disconnect the power steering gear fluid outlet pipe. Place a drain pan under the steering gear to catch the power steering fluid.
5. Disconnect the power steering gear fluid inlet pipe.
6. Position the steering gear straight ahead by turning the steering wheel until the steering wheel spokes are vertical and pointed to the left.
