Front Stabilizer Link Replacement for Leganza SX 1999
Stabilizer Link: Service and Repair
Front
Removal Procedure
1. Raise and suitably support the vehicle.
2. Remove the stabilizer shaft-to-stabilizer link nut.
3. Remove the stabilizer link-to-control arm nut.
4. Remove the stabilizer link.
Installation Procedure
IMPORTANT: The weight of the vehicle must be supported by the control arms before the stabilizer link-to-control arm nuts or the stabilizer
shaft-to-stabilizer link nuts are tightened. This can be done by lowering the vehicle onto jackstands under the control arms.
1. Install the stabilizer link.