Leganza SX L4-2.2L DOHC D-TEC MFI (1999)
7. Remove the eight bolts from the valve body cover, then remove the cover.
8. Disconnect the electrical connectors from Shift Solenoid 1 (SS1), Shift Solenoid 2 (SS2), the linear solenoid and the lockup solenoid.
Notice: Discard the SS1 O-ring.
9. Remove the retaining bolt, clamp and SS1.
Notice: Discard the SS2 O-ring.
10. Remove the retaining bolt and SS2.
11. Remove the valve body bolt located to the left of the linear solenoid.
