Leganza SX L4-2.2L DOHC D-TEC MFI (1999)
1. Install the clutch pedal to the mount brace. Make sure the return spring engages the notch on the rear of the clutch pedal.
2. Coat the piston rod bolt with multi-purpose grease.
3. Install the piston rod bolt and the locking washer.
4. Coat the pedal mounting shaft with multi-purpose grease.
5. Install the pedal mounting shaft, the washer, and the nut.
Tighten
Tighten the clutch pedal nut to 18 Nm (13 ft. lbs.).
6. Connect the return spring to the mount brace.
7. Connect the negative battery cable.
