Nubira CDX Sedan L4-2.0L DOHC D-TEC MFI (1999)
Brake Caliper: Service and Repair
Rear
Removal and Installation
Removal Procedure
1. Raise and suitably support the vehicle.
2. To preserve wheel balance, mark the position of the rear wheels relative to the wheel hubs and remove the wheels.
3. Remove the brake hose caliper inlet bolt and the washers.
4. Plug the openings in the caliper and the brake hose to prevent fluid loss and contamination.
5. Remove the caliper mounting bolts and the caliper.
Installation Procedure