Nubira CDX Sedan L4-2.0L DOHC D-TEC MFI (1999)
15. Remove and discard the lever and the adjuster pawl.
Installation Procedure
CAUTION: A high flash point oil-free solvent such as tricloroethylene or acetane, used in cleaning brake components such as backing plates, is
usually highly flammable and presents health hazards if inhaled for prolonged periods of time.
1. Clean the backing plate, ensuring the actuation cavity is free from grease and any other contamination.
2. Inspect the shoe assembly position. The shoe should fit centered on the splash shield with the shoe tips located correctly in the slots.
3. Inspect the splash shield for rust or any other damage. Replace the splash shield, if necessary.