Nubira CDX Sedan L4-2.0L DOHC D-TEC MFI (1999)
Blower Motor Relay: Service and Repair
High-Blower Relay
Removal Procedure
1. Disconnect the negative battery cable.
2. Locate the high-blower relay in the connector box under the driver's side of the instrument panel. Note the colors of the wires entering the
connector from underneath: RED, BLK, PPL, ORN.
3. Pull out the relay.
Installation Procedure
1. Align the relay contacts with the relay terminal slots.
2. Push the relay firmly into the base. The relay must be seated and flush with the base edge.
3. Connect the negative battery cable.