Nubira CDX Sedan L4-2.0L DOHC D-TEC MFI (1999)
Brake Bleeding: Service Precautions
SERVICE PRECAUTIONS
NOTICE: When fasteners are removed, always reinstall them at the same location from which they were removed. If a fastener needs to be replaced,
use the correct part number fastener for that application. If the correct part number fastener is not available, a fastener of equal size and strength (or
stronger) may be used. Fasteners that are not reused and those requiring thread-locking compound will be called out. The correct torque values must
be used when installing fasteners that require them. If the above procedures are not followed, parts or system damage could result.
NOTICE: Use only DOT 3 or equivalent hydraulic brake fluid. The use of DOT 5 (silicone) brake fluid is not recommended. Reduced brake
performance or durability may result.
NOTICE: Avoid spilling brake fluid on any of the vehicle's painted surfaces, wiring, cables, or electrical connectors. Brake fluid will damage paint
and electrical connections. If any fluid is spilled on the vehicle, flush the area with water to lessen the damage.
