Nubira CDX Sedan L4-2.0L DOHC D-TEC MFI (1999)
Tighten
Tighten the strut mount-to-body nuts to 30 Nm (22 ft. lbs.).
9. Install the trunk carpeting over the rear strut mounting nuts.
Disassembly and Reassembly
SPRINGS AND INSULATORS
Tools Required
KM-329-A Spring Compressor
Disassembly Procedure
1. Remove the rear strut assembly from the vehicle.
2. Mount the rear strut assembly into the spring compressor KM-329-A. Ensure that the hooks are properly seated.
3. Compress the spring.