Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
11. Remove the front crossmember-to-body bolts.
12. Remove the crossmember assembly from the vehicle.
Installation Procedure
1. Install the crossmember assembly.
2. Install the crossmember support plates.
3. Install the rear crossmember-to-body bolts.
Tighten the rear crossmember-to-body bolts to 196 Nm (145 ft. lbs.).
Tighten the crossmember support plate-to-body bolts in to Nm (ft. lbs.).
4. Install the front crossmember-to-body bolts.
Tighten the front crossmember-to-body bolts to 47 Nm (35 ft. lbs.).
