Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
5. Install the crossmember link-to-transaxle bracket nut.
Tighten the crossmember link-to-transaxle bracket nut to 169 Nm (125 ft. lbs.).
6. Connect the stabilizer link to the strut assembly.
7. Connect the ball joint to the knuckle assembly.
8. Connect the tie rod from the knuckle assembly.
9. Install the exhaust pipe into the vehicle.
10. Install the wheels.
11. Lower the vehicle.