Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
1. Insert the ABS 5.3 hydraulic unit into its mounting bracket and install the nuts.
Tighten the ABS 5.3 mounting nuts to 10.5 Nm (93 inch lbs.).
2. Remove the screw plugs and install all of the hydraulic brake pipes.
Tighten the brake pipe nuts to 16 Nm (12 inch lbs.).
3. Connect the 31-pin wiring harness connector J1.
4. Connect the negative battery cable.
5. Bleed the hydraulic system.