Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
1. Install the rear drum brake hose to the wheel housing bracket, and to the steering knuckle shaft bracket on each side of the vehicle.
2. Connect the brake line to the brake hose.
Tighten the brake line to 16 Nm (12 ft. lbs.).
3. Install the rear disc brake hose to the caliper.
Tighten the rear disc brake hose-to-caliper bolt to 32 Nm (24 ft. lbs.).
4. Install the rear disc brake hose and retainer on the bracket on the steering knuckle shaft.
5. Install the rear disc brake line to the brake hose on the wheel housing bracket.
Tighten the brake line to 16 Nm (12 ft. lbs.).
6. Lower the vehicle.
7. Bleed the brake system.
8. Check the brake system for leaks.
