Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
Coolant Temperature Sensor / Switch HVAC: Service and Repair
Removal
1. Disconnect the negative battery cable.
2. Remove the right console extension. Refer to Interior Trim.
3. Remove the console assembly. Refer to Interior Trim.
4. Remove the heater/air distributor case assembly lower cover screws.
5. Remove the heater/air distributor case assembly lower cover to gain access to the coolant temperature sensor.
6. Turn the sensor to release it from the heater/air distributor case housing.
7. Disconnect the electrical connector.
Installation
