Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
32. Install the oil pan.
Important: Install the oil pan within 5 minutes after applying the liquid gasket to the oil pan.
33. Install the oil pan retaining bolts.
Tighten the oil pan retaining bolts to 10 Nm (89 inch lbs.).
34. Rotate the engine on the engine overhaul stand KM-412.
35. Install the rear timing belt cover.
36. Install the rear timing belt cover bolts.
Tighten the rear timing belt cover bolts to 8 Nm (71 inch lbs.).
37. Install the crankshaft timing belt drive gear and bolt.
Tighten the crankshaft timing belt drive gear bolt to 130 Nm (96 ft. lbs.) plus 40° to 50° using the torque angular gauge KM-470-6.
38. Install the engine mount and retaining bolts.
Tighten the engine mount retaining bolts to 60 Nm (44 ft. lbs.).
