Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
52. Install the valve cover bolts.
Tighten the valve cover bolts to 8 Nm (71 inch lbs.).
53. Connect the ignition wires to the spark plugs.
54. Install the spark plug cover.
55. Install the spark plug cover bolts.
Tighten the spark plug cover bolts to 3 Nm (27 inch lbs.).
56. Connect the crankcase breather tube to the valve cover.
57. Install the front timing belt cover.
58. Install the front timing belt cover bolts.
Tighten the front timing belt cover bolts to 6 Nm (53 inch lbs.).
59. Install the engine lifting device.
60. Remove the engine from the engine overhaul stand KM-412.
