Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
12. Remove the right engine mount bracket. Refer to Engine Mount.
13. Remove the front timing belt cover bolts.
14. Remove the front timing belt cover.
15. Using the crankshaft gear bolt, rotate the crankshaft clockwise until the timing mark on the crankshaft gear is aligned with the notch at the bottom
of the rear timing belt cover.
Notice: The camshaft gears must align with the notch on the valve cover or damage to the engine could result.
16. Align the camshaft gears with the notch on the valve cover.
Important: Use the intake gear mark for the intake camshaft gear and the exhaust gear mark for the exhaust camshaft gear since both gears are
interchangeable.
