Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
Heater Core Case: Service and Repair
NOTE: The Position of Heating, Ventilation and Air Conditioning (HVAC) Controller moved upward, but the On-Vehicle Service is similar.
Removal
1. Disconnect the negative battery cable.
2. Remove the instrument panel carrier assembly.
3. Drain the cooling system.
4. Turn the vacuum hose and pull the hose off.
5. Compress the heater hose clamps at the bulkhead and slide the clamps toward the engine.
6. Remove the two heater hoses tram the core lines at the bulkhead.
7. Remove the screws that secure the heater/air distributor case assembly to the bulkhead on either side of the heater core pipes.