Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
8. Remove the heater/air distributor case screw located above the fuel filter on the engine compartment side of the bulkhead.
9. Have an assistant support the heater/air distributor case from inside the vehicle.
NOTE: Handle the case carefully to avoid damage to the mechanical door operating linkage.
10. Remove the screws from the connecting block opening mount on the engine compartment side of the bulkhead on the right-hand side of the
vehicle. The case assembly will start to drop.
11. Pull the heater/air distributor case straight away from the bulkhead to free the alignment pegs from their openings in the bulkhead.
12. Remove the heater/air distributor case assembly from the vehicle.
Installation
