Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
1. Install the bulb.
2. Install the retaining wire.
3. Install the fog lamp access cover.
4. Connect the electrical connector.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
5. Install the front fog lamp with the nuts.
Tighten
Tighten the front fog tamp nuts to 4 N.m (35 lb-in).
6. Connect the negative battery cable.
