Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
1. Install the headlamp bulb.
2. Connect the headlamp bulb electrical connector.
3. Install the cap concealing the headlamp bulb.
4. Connect the electrical connectors.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
5. Install the headlamp assembly with the bolts.
6. Connect the negative battery cable.
Tighten
Tighten the headlamp assembly bolts to 4 N.m (35 lb-in).
