Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
CAUTION: Always make sure there is an electrical load (lamp bulb, etc.) in any circuit between battery terminals. Do not make a short circuit between
battery terminals with a jumper wire. Hazardous sparking will result.
Test Description
The number(s) below refer to step(s) on the diagnostic table.
1. Bulb test. Clip one end of a jumper wire to the negative battery terminal. Clip the other end of the jumper wire onto one end of the bulb. Take the
free end of the bulb (the end without the jumper attached) and touch it to the positive battery terminal.
