Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
1. Connect the electrical connector at the fuel cutoff switch.
2. Install the fuel cutoff switch mounting bolts.
Tighten
Tighten the fuel cutoff switch mounting bolts to 27 lb-in (3 N.m).
3. Reposition the carpet.
4. Install the lower B-pillar trim panel. Refer to Interior Trim.
5. Install the passenger front rocker trim panel. Refer to Interior Trim.
6. Connect the negative battery cable.
IMPORTANT: The fuel cutoff switch may have to be reset to enable the vehicle to start.
