Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
Alarm Module: Service and Repair
Removal
1. Disconnect the negative battery cable.
2. Remove floor console left side forward trim panel. Refer to Interior Trim.
3. Disconnect the control module/receiver electrical connector.
4. Slide the control module/receiver toward the rear of the vehicle and remove it.
Installation
1. Install the control module/receiver by sliding it onto its bracket.
2. Connect the control module/receiver electrical connector.
3. Install the floor console left side forward trim panel. Refer to Interior Trim.
4. Connect the negative battery cable.