daewoo Workshop Repair Guides

Daewoo Nubira CDX Wagon Service & Repair Manuals | Workshop Manuals

ABOUT US
Clockspring Assembly / Spiral Cable, Air Bag > < Sensing and Diagnostic Module (SDM) <--> [Air Bag Control Module]|Locations|Page 3197

Nubira CDX Wagon L4 Airbag Module Location (2000)

Page 2
background image

Installation Procedure

1. Install the SDM with the arrow pointing toward the front of the vehicle.
2. Install the SDM mounting bolts.

Tighten the sensing and diagnostic module mounting bolts to 12 N.m (106 lb.in).

3. Connect the SDM electrical connector.
4. Install the connector position assurance lock.
5. Install the floor console. Refer to Interior Trim.
6. Enable the SIR system. Refer to Enabling the SIR System.

Clockspring Assembly / Spiral Cable, Air Bag > < Sensing and Diagnostic Module (SDM) <--> [Air Bag Control Module]|Locations|Page 3197