daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Sensors and Switches - Instrument Panel > < A/C Pressure Transducer <--> [Refrigerant Pressure Sensor / Switch, HVAC]|Service and Repair|Page 177
Page 1
background image

Solar Sensor: Service and Repair

Removal

1. Disconnect the negative battery cable.
2. Gently pry up on the sun sensor to remove it.
3. Secure the electrical connector to prevent it from falling beneath the dash.
4. Disconnect the electrical connector.

Installation

1. Connect the electrical connector.
2. Insert and press the sun sensor into position in the dash.
3. Connect the negative battery cable.

Sensors and Switches - Instrument Panel > < A/C Pressure Transducer <--> [Refrigerant Pressure Sensor / Switch, HVAC]|Service and Repair|Page 177