Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
Starter Motor: Service and Repair
Disassembly and Assembly
Disassembly
1. Remove the starter.
2. Remove the starter through-bolts.
3. Remove the commutator end frame/brush holder assembly.
4. Inspect the brushes, the pop-out springs, and the brush holders for wear and damage. Replace the assembly, if necessary.
IMPORTANT: This test should be made for each ground or insulated brush to ensure continuity through both brushes and leads. If the lamp fails
to light, the field coil is open and will require replacement.