Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
10. Lubricate the drive end of the armature shaft with lubricant and install the new gear and the bearing, it necessary.
11. Position the solenoid assembly and the return spring against the plunger. Apply sealer to the solenoid flange.
12. Fasten the solenoid assembly with the screws.
Tighten
Tighten the starter solenoid assembly screws to 8 N.m (71 lb-in).
13. Install the field coil connection to the starter terminal. Install the nut.
Tighten