Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
9. On vehicles equipped with rear drum brakes, lower the strut assembly and separate the brake line from the strut assembly.
10. Remove the rear strut assembly from the vehicle.
Installation Procedure
Important: On vehicles equipped with rear drum brakes, the brake hose will easily connect to the strut assembly as the assembly is being installed
into the vehicle. On vehicles equipped with rear disc brakes, the brake hose can be connected to the strut assembly at any time after the strut assembly
has been installed into the vehicle.
1. Install the rear strut assembly into the vehicle. On vehicles equipped with rear drum brakes, secure the brake line into the holder as the assembly
goes into place.
