Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
8. Lower the vehicle.
Tighten the strut mount-to-body nuts to 30 Nm (22 ft. lbs.)
9. Install the trunk carpeting over the rear strut mounting nuts. For station wagons, remove the panels that cover the luggage compartment
wheelhouse trim panel (wagon).
Disassembly and Reassembly
SPRINGS AND INSULATORS
Tools Required
KM-329-A Spring Compressor
Disassembly Procedure
1. Remove the rear strut assembly from the vehicle.
2. Mount the rear strut assembly into the spring compressor KM-329-A. Ensure that the hooks are properly seated.
3. Compress the spring.
