Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
Installation Procedure
1. Install the cooler hose onto the lower end of the radiator and tighten the hose clamp.
2. Install the cooler pipe and hose onto the upper end of the radiator.
-
Tighten the oil cooler pipe bolt to 16 ft. lbs. (22 Nm).
-
Tighten the oil cooler pipe bracket bolt to 18 ft. lbs. (25 Nm).
3. Install the hoses onto the transaxle.
4. Tighten the transaxle hose clamps.
5. Refill the transaxle fluid.