Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
Window Regulator: Service and Repair
Manual Rear Window Regulator
Removal
1. Remove the regulator handle. Refer to "Manual Rear Window Regulator Handle".
2. Remove the rear door glass.
3. Remove the nuts and the window regulator.
Installation
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
1. Install the window regulator with the nuts.
Tighten
Tighten the window regulator nuts to 8 N.m (71 lb-in).
2. Install the rear door glass.
3. Install the regulator handle. Refer to "Manual Rear Window Regulator Handle".
