Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
1. Install the wiper motor with the bolts.
Tighten
Tighten the wiper motor bolts to 9 N.m (80 lb-in).
2. Connect the electrical connector.
3. Press the wiper arm linkage onto the motor drive shaft.
4. Install the wiper arm linkage to the motor drive shaft with the washer and the nut.
Tighten
Tighten the wiper arm linkage nut to 8.5 N.m (75 lb-in).
5. Install the left side portion of the cowl vent grille. Refer to Body Front End.
6. Connect the negative battery cable.