Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
8. Install the piston into the caliper.
9. Install the outer seal into the piston groove. Apply steady hand pressure until the piston is seated in the bore.
10. Inspect the brake shoe linings for minimum thickness. If necessary, install new shoes.
11. Inspect the guide pins and boots. If the boots are damaged, or if the guide pins do not slide easily, re- place these parts. Lubricate the guide pins
with a lithium soap base glycol grease or other grease which will not deteriorate or swell the rubber boots.
12. Install the caliper.