Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
1. Install the heater core into the case.
2. Secure the heater core lines to the case with the retaining bracket clamp and the screw.
Tighten
Tighten the heater core retaining bracket screw to N.m (lb-in).
3. Install the heater core body with the retaining spring clamp.
4. Install the heater core cover.
5. Install and tighten the screws that secure the heater core cover to the heater/air distributor case assembly.
Tighten
Tighten the heater core cover screws to N.m (lb-in).
6. Install the actuators for the vent/floor and the defroster doors.
7. Install the heater/air distributor case. Refer to "Heater/Air Distributor Case Assembly".
8. Install the instrument panel. Refer to Instrumentation/Driver Information.
9. Fill the cooling system.
10. Connect the negative battery cable.